Product ID:LIQUID ASPHALT, MEDIUM CURING, MC-70
MSDS Date:03/01/1986
FSC:8030
NIIN:00F048013
MSDS Number: BZDTS

Emergency Phone: 307-634-3551

Info Phone: 307-634-3551

Cage: 0EM46

Telephone: 307-634-3551

Cage: 0EM46

PETROLEUM DISTILLATE

Fraction By Weight: 35.4%

PETROLEUM ASPHALTS

Fraction By Weight: 64.6%

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES/SKIN: IRRITATION. INHALATION:
UPPER RESPIRATORY TRACT IRRITATION. ASPHALT CONTAIN SMALL AMOUNTS
OF POLYNUCLEAR AROMATIC HYDROCARBONS. SULFUR MAY FORM HYDROGEN
SULFIDE WHEN HEATED. HYDROGEN SULFID E CONCENTRATIONS OF 1000-2000
PPM ARE EXTREMELY HAZARDOUS . DEATH MAY OCCUR AT 600 PPM.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:THERMAL BURNS, NAUSEA, IRRITATION. HYDROGEN
SULFIDE-HEADACHE, DIZZINESS, NAUSEA, GI DISTURBANCES, COUGHING, A
SENSATION OF DRYNESS & PAIN IN THE NOSE, THROAT & CHEST, CONFUSION
& UNCONSCIOUSNESS.

First Aid:HOT MATERIAL: EYES: IMMEDIATELY WASH W/FRESH WATER. SKIN: IF
MELTED MATERIAL GETS ON SKIN, QUICKLY COOL IN WATER. DON'T USE
SOLVENTS/THINNERS TO REMOVE MATERIAL FROM SKIN. REMOVE W/VEGETABLE
OIL/MINER AL OIL. INHALATION: MOVE TO FRESH AIR. IF BREATHING HAS
STOPPED, APPLY CPR. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Flash Point Method:TOC
Flash Point:>100F
Extinguishing Media:CO2, DRY CHEMICAL, FOAM, WATERSPRAY
Fire Fighting Procedures:DON'T ENTER ENCLOSED/CONFINED FIRE SPACE W/O
PROPER PROTECTIVE EQUIPMENT & SELF CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:HOT ASPHALT MAY EMIT TOXIC HYDROGEN
SULFIDE GAS.

Spill Release Procedures:ALLOW LIQUID MATERIAL TO COOL & SOLIDIFY.
CLEAN UP AS SOON AS POSSIBLE, OBSERVE PRECAUTIONS IN SPECIAL
PROTECTIVE INFORMATION & PRODUCT LABEL.

Handling and Storage Precautions:KEEP OUT OF REACH OF CHILDREN. SKIN
CONTACT & BREATHING OF MISTS, FUMES/VAPORS SHOULD BE REDUCED TO A
MINIMUM.
Other Precautions:DON'T WELD, HEAT/DRILL CONTAINER. REPLACE CAP/BUNG.
EMPTIED CONTAINER CONTAINS HAZARDOUS MATERIAL WHICH MAY IGNITE
W/EXPLOSIVE VIOLENCE IF HEATED SUFFICIENTLY. DON'T USE PRESSURE TO
EMPTY DRUM/EXPLOSI ON MAY RESULT. AVOID EYE & SKIN CONTACT.

Respiratory Protection:IF OPERATING CONDITIONS CREATE AIRBORNE
CONCENTRAIONS WHICH EXCEED THE EXPOSURE STANDARD, THE USE OF AN
APPROVED RESPIRATOR/AIR-SUPPLIED BREATHING EQUIPMENT IS
RECOMMENDED.
Ventilation:USE ADEQUATE VENTILATION TO KEEP THE AIRBORNE
CONCENTRATIONS OF THIS MATERIAL Protective Gloves:REQUIRED
Eye Protection:CHEMICAL SAFETY GOGGLES
Other Protective Equipment:PROTECTIVE CLOHTING, WASHING FACILITIES FOR
EYES & SKIN.
Supplemental Safety and Health

Spec Gravity:0.95
Solubility in Water:INSOLUBLE
Appearance and Odor:ODORLESS, BLACK SEMI-SOLID

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING MATERIALS
Stability Condition to Avoid:HEAT
Hazardous Decomposition Products:HYDROGEN SULFIDE GAS BY COMBUSTION.
CO2, WATER VAPOR, OXIDES OF SULFUR & NITROGEN, INCOMPLETE
COMBUSTION CAN PRODUCE CO.

Waste Disposal Methods:PLACE CONTAMINATED MATERIALS IN DISPOSABLE
CONTAINERS & BURY IN AN APPROVED DUMPING AREA/DISPOSE OF IN
ACCORDANCE W/LOCAL, STATE & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.